Updated emacs to 31 and fixed kanshi profile descriptors

assets/.config/fuzzel/fuzzel.ini

@@ -0,0 +1,15 @@
+[colors]
+background=000000e6
+text=eeeeeeff
+match=eeeeeeff
+border=eeeeeeff
+prompt=eeeeeeff
+input=eeeeeeff
+
+selection=0000fff2
+selection-text=eeeeeeff
+selection-match=eeeeeeff
+
+[border]
+width=3
+radius=0

assets/.config/kanshi/config

@@ -0,0 +1,28 @@
+profile docked {
+    # Center 4K monitor
+    output "Dell Inc. DELL S3221QS 9Y4W6N3" {
+        mode 3840x2160@60.000
+        position 1920,120
+        scale 1.25
+    }
+
+    # Right 1080p monitor (rotated left)
+    output "Dell Inc. DELL U2417H XVNNT6B1890L" {
+        mode 1920x1080@60.000
+        position 3072,0
+        transform 90
+    }
+
+    # Laptop screen (below)
+    output eDP-1 {
+        mode 1920x1080@144.003
+        position 0,1060
+    }
+}
+
+profile undocked {
+    output eDP-1 {
+        mode 1920x1080@144.003
+        position 0,0
+    }
+}

assets/.config/mako/config

@@ -0,0 +1,25 @@
+font=monospace 12
+background-color=#000000e6
+text-color=#eeeeeeff
+border-color=#eeeeeeff
+border-size=3
+default-timeout=10000
+
+[urgency=low]
+background-color=#1a1a1ae6
+text-color=#999999ff
+border-color=#444444ff
+default-timeout=5000
+
+[urgency=normal]
+background-color=#000000e6
+text-color=#eeeeeeff
+border-color=#eeeeeeff
+default-timeout=10000
+
+[urgency=critical]
+background-color=#4d0000e6
+text-color=#ffffffff
+border-color=#ff0000ff
+border-size=5
+default-timeout=0

assets/.config/niri/config.kdl

@@ -0,0 +1,556 @@
+// This config is in the KDL format: https://kdl.dev
+// "/-" comments out the following node.
+// Check the wiki for a full description of the configuration:
+// https://niri-wm.github.io/niri/Configuration:-Introduction
+
+// Input device configuration.
+// Find the full list of options on the wiki:
+// https://niri-wm.github.io/niri/Configuration:-Input
+input {
+    keyboard {
+        xkb {
+            // You can set rules, model, layout, variant and options.
+            // For more information, see xkeyboard-config(7).
+
+            // For example:
+            // layout "us,ru"
+            // options "grp:win_space_toggle,compose:ralt,ctrl:nocaps"
+
+            // If this section is empty, niri will fetch xkb settings
+            // from org.freedesktop.locale1. You can control these using
+            // localectl set-x11-keymap.
+        }
+
+        // Enable numlock on startup, omitting this setting disables it.
+        numlock
+    }
+
+    // Next sections include libinput settings.
+    // Omitting settings disables them, or leaves them at their default values.
+    // All commented-out settings here are examples, not defaults.
+    touchpad {
+        // off
+        tap
+        // dwt
+        // dwtp
+        // drag false
+        // drag-lock
+        natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "two-finger"
+        // disabled-on-external-mouse
+    }
+
+    mouse {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "no-scroll"
+    }
+
+    trackpoint {
+        // off
+        // natural-scroll
+        // accel-speed 0.2
+        // accel-profile "flat"
+        // scroll-method "on-button-down"
+        // scroll-button 273
+        // scroll-button-lock
+        // middle-emulation
+    }
+
+    // Uncomment this to make the mouse warp to the center of newly focused windows.
+    // warp-mouse-to-focus
+
+    // Focus windows and outputs automatically when moving the mouse into them.
+    // Setting max-scroll-amount="0%" makes it work only on windows already fully on screen.
+    focus-follows-mouse max-scroll-amount="0%"
+}
+
+// Settings that influence how windows are positioned and sized.
+// Find more information on the wiki:
+// https://niri-wm.github.io/niri/Configuration:-Layout
+layout {
+    // Set gaps around windows in logical pixels.
+    gaps 16
+
+    // When to center a column when changing focus, options are:
+    // - "never", default behavior, focusing an off-screen column will keep at the left
+    //   or right edge of the screen.
+    // - "always", the focused column will always be centered.
+    // - "on-overflow", focusing a column will center it if it doesn't fit
+    //   together with the previously focused column.
+    center-focused-column "never"
+
+    // You can customize the widths that "switch-preset-column-width" (Mod+R) toggles between.
+    preset-column-widths {
+        // Proportion sets the width as a fraction of the output width, taking gaps into account.
+        // For example, you can perfectly fit four windows sized "proportion 0.25" on an output.
+        // The default preset widths are 1/3, 1/2 and 2/3 of the output.
+        proportion 0.33333
+        proportion 0.5
+        proportion 0.66667
+
+        // Fixed sets the width in logical pixels exactly.
+        // fixed 1920
+    }
+
+    // You can also customize the heights that "switch-preset-window-height" (Mod+Ctrl+Shift+R) toggles between.
+    // preset-window-heights { }
+
+    // You can change the default width of the new windows.
+    default-column-width { proportion 0.5; }
+    // If you leave the brackets empty, the windows themselves will decide their initial width.
+    // default-column-width {}
+
+    // By default focus ring and border are rendered as a solid background rectangle
+    // behind windows. That is, they will show up through semitransparent windows.
+    // This is because windows using client-side decorations can have an arbitrary shape.
+    //
+    // If you don't like that, you should uncomment `prefer-no-csd` below.
+    // Niri will draw focus ring and border *around* windows that agree to omit their
+    // client-side decorations.
+    //
+    // Alternatively, you can override it with a window rule called
+    // `draw-border-with-background`.
+
+    // You can change how the focus ring looks.
+    focus-ring {
+        // Uncomment this line to disable the focus ring.
+        // off
+
+        // How many logical pixels the ring extends out from the windows.
+        width 4
+
+        // Colors can be set in a variety of ways:
+        // - CSS named colors: "red"
+        // - RGB hex: "#rgb", "#rgba", "#rrggbb", "#rrggbbaa"
+        // - CSS-like notation: "rgb(255, 127, 0)", rgba(), hsl() and a few others.
+
+        // Color of the ring on the active monitor.
+        active-color "#0000ff"
+
+        // Color of the ring on inactive monitors.
+        //
+        // The focus ring only draws around the active window, so the only place
+        // where you can see its inactive-color is on other monitors.
+        inactive-color "#505050"
+
+        // You can also use gradients. They take precedence over solid colors.
+        // Gradients are rendered the same as CSS linear-gradient(angle, from, to).
+        // The angle is the same as in linear-gradient, and is optional,
+        // defaulting to 180 (top-to-bottom gradient).
+        // You can use any CSS linear-gradient tool on the web to set these up.
+        // Changing the color space is also supported, check the wiki for more info.
+        //
+        // active-gradient from="#80c8ff" to="#c7ff7f" angle=45
+
+        // You can also color the gradient relative to the entire view
+        // of the workspace, rather than relative to just the window itself.
+        // To do that, set relative-to="workspace-view".
+        //
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can also add a border. It's similar to the focus ring, but always visible.
+    border {
+        // The settings are the same as for the focus ring.
+        // If you enable the border, you probably want to disable the focus ring.
+        off
+
+        width 4
+        active-color "#ffc87f"
+        inactive-color "#505050"
+
+        // Color of the border around windows that request your attention.
+        urgent-color "#9b0000"
+
+        // Gradients can use a few different interpolation color spaces.
+        // For example, this is a pastel rainbow gradient via in="oklch longer hue".
+        //
+        // active-gradient from="#e5989b" to="#ffb4a2" angle=45 relative-to="workspace-view" in="oklch longer hue"
+
+        // inactive-gradient from="#505050" to="#808080" angle=45 relative-to="workspace-view"
+    }
+
+    // You can enable drop shadows for windows.
+    shadow {
+        // Uncomment the next line to enable shadows.
+        // on
+
+        // By default, the shadow draws only around its window, and not behind it.
+        // Uncomment this setting to make the shadow draw behind its window.
+        //
+        // Note that niri has no way of knowing about the CSD window corner
+        // radius. It has to assume that windows have square corners, leading to
+        // shadow artifacts inside the CSD rounded corners. This setting fixes
+        // those artifacts.
+        //
+        // However, instead you may want to set prefer-no-csd and/or
+        // geometry-corner-radius. Then, niri will know the corner radius and
+        // draw the shadow correctly, without having to draw it behind the
+        // window. These will also remove client-side shadows if the window
+        // draws any.
+        //
+        // draw-behind-window true
+
+        // You can change how shadows look. The values below are in logical
+        // pixels and match the CSS box-shadow properties.
+
+        // Softness controls the shadow blur radius.
+        softness 30
+
+        // Spread expands the shadow.
+        spread 5
+
+        // Offset moves the shadow relative to the window.
+        offset x=0 y=5
+
+        // You can also change the shadow color and opacity.
+        color "#0007"
+    }
+
+    // Struts shrink the area occupied by windows, similarly to layer-shell panels.
+    // You can think of them as a kind of outer gaps. They are set in logical pixels.
+    // Left and right struts will cause the next window to the side to always be visible.
+    // Top and bottom struts will simply add outer gaps in addition to the area occupied by
+    // layer-shell panels and regular gaps.
+    struts {
+        // left 64
+        // right 64
+        // top 64
+        // bottom 64
+    }
+}
+
+// Add lines like this to spawn processes at startup.
+// Note that running niri as a session supports xdg-desktop-autostart,
+// which may be more convenient to use.
+// See the binds section below for more spawn examples.
+
+// This line starts waybar, a commonly used bar for Wayland compositors.
+spawn-at-startup "waybar"
+spawn-sh-at-startup "kanshi"
+spawn-sh-at-startup "awww-daemon"
+spawn-at-startup "mako"
+spawn-sh-at-startup "polkit-gnome-authentication-agent-1"
+spawn-at-startup "xwayland-satellite"
+
+// To run a shell command (with variables, pipes, etc.), use spawn-sh-at-startup:
+// spawn-sh-at-startup "qs -c ~/source/qs/MyAwesomeShell"
+
+hotkey-overlay {
+    // Uncomment this line to disable the "Important Hotkeys" pop-up at startup.
+    // skip-at-startup
+}
+
+// Uncomment this line to ask the clients to omit their client-side decorations if possible.
+// If the client will specifically ask for CSD, the request will be honored.
+// Additionally, clients will be informed that they are tiled, removing some client-side rounded corners.
+// This option will also fix border/focus ring drawing behind some semitransparent windows.
+// After enabling or disabling this, you need to restart the apps for this to take effect.
+prefer-no-csd
+
+// You can change the path where screenshots are saved.
+// A ~ at the front will be expanded to the home directory.
+// The path is formatted with strftime(3) to give you the screenshot date and time.
+screenshot-path "~/Pictures/Screenshots/Screenshot from %Y-%m-%d %H-%M-%S.png"
+
+// You can also set this to null to disable saving screenshots to disk.
+// screenshot-path null
+
+// Animation settings.
+// The wiki explains how to configure individual animations:
+// https://niri-wm.github.io/niri/Configuration:-Animations
+animations {
+    // Uncomment to turn off all animations.
+    // off
+
+    // Slow down all animations by this factor. Values below 1 speed them up instead.
+    // slowdown 3.0
+}
+
+// Window rules let you adjust behavior for individual windows.
+// Find more information on the wiki:
+// https://niri-wm.github.io/niri/Configuration:-Window-Rules
+
+// Example: enable rounded corners for all windows.
+// (This example rule is commented out with a "/-" in front.)
+/-window-rule {
+    geometry-corner-radius 12
+    clip-to-geometry true
+}
+
+// Turn off hot corners
+gestures {
+    hot-corners {
+        off;
+    }
+}
+
+binds {
+    // Keys consist of modifiers separated by + signs, followed by an XKB key name
+    // in the end. To find an XKB name for a particular key, you may use a program
+    // like wev.
+    //
+    // "Mod" is a special modifier equal to Super when running on a TTY, and to Alt
+    // when running as a winit window.
+    //
+    // Most actions that you can bind here can also be invoked programmatically with
+    // `niri msg action do-something`.
+
+    // Mod-Shift-/, which is usually the same as Mod-?,
+    // shows a list of important hotkeys.
+    Mod+Shift+Slash { show-hotkey-overlay; }
+
+    // Suggested binds for running programs: terminal, app launcher, screen locker.
+    Mod+Return hotkey-overlay-title="Open a Terminal: alacritty" { spawn "alacritty"; }
+    Mod+D hotkey-overlay-title="Run an Application: fuzzel" { spawn "fuzzel"; }
+    Mod+Shift+D { spawn "vesktop"; }
+    Mod+Shift+E hotkey-overlay-title="Run an Application: emacs" { spawn "emacsclient" "-c"; }
+    Mod+Shift+F hotkey-overlay-title="Run an Application: brave" { spawn "brave"; }
+    Mod+Shift+M { spawn "proton-mail"; }
+    Mod+Shift+P { spawn "rofi-rbw"; }
+    Mod+Shift+T { spawn "thunar"; }
+    Mod+Shift+X hotkey-overlay-title="Lock the Screen: swaylock" {
+        spawn "sh" "-c" "loginctl lock-session; swaylock -f; niri msg action power-off-monitors";
+    }
+
+    // Use spawn-sh to run a shell command. Do this if you need pipes, multiple commands, etc.
+    // Note: the entire command goes as a single argument. It's passed verbatim to `sh -c`.
+    // For example, this is a standard bind to toggle the screen reader (orca).
+    Super+Alt+S allow-when-locked=true hotkey-overlay-title=null { spawn-sh "pkill orca || exec orca"; }
+
+    // Example volume keys mappings for PipeWire & WirePlumber.
+    // The allow-when-locked=true property makes them work even when the session is locked.
+    // Using spawn-sh allows to pass multiple arguments together with the command.
+    // "-l 1.0" limits the volume to 100%.
+    XF86AudioRaiseVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1+ -l 1.0"; }
+    XF86AudioLowerVolume allow-when-locked=true { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.1-"; }
+    XF86AudioMute        allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle"; }
+    XF86AudioMicMute     allow-when-locked=true { spawn-sh "wpctl set-mute @DEFAULT_AUDIO_SOURCE@ toggle"; }
+
+    // Example media keys mapping using playerctl.
+    // This will work with any MPRIS-enabled media player.
+    XF86AudioPlay        allow-when-locked=true { spawn-sh "playerctl play-pause"; }
+    XF86AudioStop        allow-when-locked=true { spawn-sh "playerctl stop"; }
+    XF86AudioPrev        allow-when-locked=true { spawn-sh "playerctl previous"; }
+    XF86AudioNext        allow-when-locked=true { spawn-sh "playerctl next"; }
+
+    // Example brightness key mappings for brightnessctl.
+    // You can use regular spawn with multiple arguments too (to avoid going through "sh"),
+    // but you need to manually put each argument in separate "" quotes.
+    XF86MonBrightnessUp allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "+10%"; }
+    XF86MonBrightnessDown allow-when-locked=true { spawn "brightnessctl" "--class=backlight" "set" "10%-"; }
+
+    // Open/close the Overview: a zoomed-out view of workspaces and windows.
+    // You can also move the mouse into the top-left hot corner,
+    // or do a four-finger swipe up on a touchpad.
+    Mod+O repeat=false { toggle-overview; }
+
+    Mod+Q repeat=false { close-window; }
+
+    Mod+H     { focus-column-left; }
+    Mod+J     { focus-window-down; }
+    Mod+K     { focus-window-up; }
+    Mod+L     { focus-column-right; }
+
+    Mod+Ctrl+H     { move-column-left; }
+    Mod+Ctrl+J     { move-window-down; }
+    Mod+Ctrl+K     { move-window-up; }
+    Mod+Ctrl+L     { move-column-right; }
+
+    // Alternative commands that move across workspaces when reaching
+    // the first or last window in a column.
+    // Mod+J     { focus-window-or-workspace-down; }
+    // Mod+K     { focus-window-or-workspace-up; }
+    // Mod+Ctrl+J     { move-window-down-or-to-workspace-down; }
+    // Mod+Ctrl+K     { move-window-up-or-to-workspace-up; }
+
+    Mod+Home { focus-column-first; }
+    Mod+End  { focus-column-last; }
+    Mod+Ctrl+Home { move-column-to-first; }
+    Mod+Ctrl+End  { move-column-to-last; }
+
+    Mod+Shift+H     { focus-monitor-left; }
+    Mod+Shift+J     { focus-monitor-down; }
+    Mod+Shift+K     { focus-monitor-up; }
+    Mod+Shift+L     { focus-monitor-right; }
+
+    Mod+Shift+Ctrl+H     { move-column-to-monitor-left; }
+    Mod+Shift+Ctrl+J     { move-column-to-monitor-down; }
+    Mod+Shift+Ctrl+K     { move-column-to-monitor-up; }
+    Mod+Shift+Ctrl+L     { move-column-to-monitor-right; }
+
+    // Move entire workspace to another monitor
+    Mod+Shift+Period { move-workspace-to-monitor-right; }
+    Mod+Shift+Comma  { move-workspace-to-monitor-left; }
+
+    Mod+Page_Down      { focus-workspace-down; }
+    Mod+Page_Up        { focus-workspace-up; }
+    Mod+U              { focus-workspace-down; }
+    Mod+I              { focus-workspace-up; }
+    Mod+Ctrl+Page_Down { move-column-to-workspace-down; }
+    Mod+Ctrl+Page_Up   { move-column-to-workspace-up; }
+    Mod+Ctrl+U         { move-column-to-workspace-down; }
+    Mod+Ctrl+I         { move-column-to-workspace-up; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+Page_Down { move-window-to-workspace-down; }
+    // ...
+
+    Mod+Shift+Page_Down { move-workspace-down; }
+    Mod+Shift+Page_Up   { move-workspace-up; }
+    Mod+Shift+U         { move-workspace-down; }
+    Mod+Shift+I         { move-workspace-up; }
+
+    // You can bind mouse wheel scroll ticks using the following syntax.
+    // These binds will change direction based on the natural-scroll setting.
+    //
+    // To avoid scrolling through workspaces really fast, you can use
+    // the cooldown-ms property. The bind will be rate-limited to this value.
+    // You can set a cooldown on any bind, but it's most useful for the wheel.
+    Mod+WheelScrollDown      cooldown-ms=150 { focus-workspace-down; }
+    Mod+WheelScrollUp        cooldown-ms=150 { focus-workspace-up; }
+    Mod+Ctrl+WheelScrollDown cooldown-ms=150 { move-column-to-workspace-down; }
+    Mod+Ctrl+WheelScrollUp   cooldown-ms=150 { move-column-to-workspace-up; }
+
+    Mod+WheelScrollRight      { focus-column-right; }
+    Mod+WheelScrollLeft       { focus-column-left; }
+    Mod+Ctrl+WheelScrollRight { move-column-right; }
+    Mod+Ctrl+WheelScrollLeft  { move-column-left; }
+
+    // Usually scrolling up and down with Shift in applications results in
+    // horizontal scrolling; these binds replicate that.
+    Mod+Shift+WheelScrollDown      { focus-column-right; }
+    Mod+Shift+WheelScrollUp        { focus-column-left; }
+    Mod+Ctrl+Shift+WheelScrollDown { move-column-right; }
+    Mod+Ctrl+Shift+WheelScrollUp   { move-column-left; }
+
+    // Similarly, you can bind touchpad scroll "ticks".
+    // Touchpad scrolling is continuous, so for these binds it is split into
+    // discrete intervals.
+    // These binds are also affected by touchpad's natural-scroll, so these
+    // example binds are "inverted", since we have natural-scroll enabled for
+    // touchpads by default.
+    // Mod+TouchpadScrollDown { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02+"; }
+    // Mod+TouchpadScrollUp   { spawn-sh "wpctl set-volume @DEFAULT_AUDIO_SINK@ 0.02-"; }
+
+    // You can refer to workspaces by index. However, keep in mind that
+    // niri is a dynamic workspace system, so these commands are kind of
+    // "best effort". Trying to refer to a workspace index bigger than
+    // the current workspace count will instead refer to the bottommost
+    // (empty) workspace.
+    //
+    // For example, with 2 workspaces + 1 empty, indices 3, 4, 5 and so on
+    // will all refer to the 3rd workspace.
+    Mod+1 { focus-workspace 1; }
+    Mod+2 { focus-workspace 2; }
+    Mod+3 { focus-workspace 3; }
+    Mod+4 { focus-workspace 4; }
+    Mod+5 { focus-workspace 5; }
+    Mod+6 { focus-workspace 6; }
+    Mod+7 { focus-workspace 7; }
+    Mod+8 { focus-workspace 8; }
+    Mod+9 { focus-workspace 9; }
+    Mod+Ctrl+1 { move-column-to-workspace 1; }
+    Mod+Ctrl+2 { move-column-to-workspace 2; }
+    Mod+Ctrl+3 { move-column-to-workspace 3; }
+    Mod+Ctrl+4 { move-column-to-workspace 4; }
+    Mod+Ctrl+5 { move-column-to-workspace 5; }
+    Mod+Ctrl+6 { move-column-to-workspace 6; }
+    Mod+Ctrl+7 { move-column-to-workspace 7; }
+    Mod+Ctrl+8 { move-column-to-workspace 8; }
+    Mod+Ctrl+9 { move-column-to-workspace 9; }
+
+    // Alternatively, there are commands to move just a single window:
+    // Mod+Ctrl+1 { move-window-to-workspace 1; }
+
+    // Switches focus between the current and the previous workspace.
+    // Mod+Tab { focus-workspace-previous; }
+
+    // The following binds move the focused window in and out of a column.
+    // If the window is alone, they will consume it into the nearby column to the side.
+    // If the window is already in a column, they will expel it out.
+    Mod+BracketLeft  { consume-or-expel-window-left; }
+    Mod+BracketRight { consume-or-expel-window-right; }
+
+    // Consume one window from the right to the bottom of the focused column.
+    Mod+Comma  { consume-window-into-column; }
+    // Expel the bottom window from the focused column to the right.
+    Mod+Period { expel-window-from-column; }
+
+    // Cycle through widths set in preset-column-widths.
+    Mod+R { switch-preset-column-width; }
+    // Cycling through the presets in reverse order is also possible.
+    Mod+Shift+R { switch-preset-column-width-back; }
+
+    Mod+Ctrl+Shift+R { switch-preset-window-height; }
+    Mod+Ctrl+R { reset-window-height; }
+
+    // Fullscreen/maximized column views.
+    Mod+F { maximize-column; }
+    Mod+Ctrl+F { fullscreen-window; }
+
+    // While maximize-column leaves gaps and borders around the window,
+    // maximize-window-to-edges doesn't: the window expands to the edges of the screen.
+    // This bind corresponds to normal window maximizing,
+    // e.g. by double-clicking on the titlebar.
+    Mod+M { maximize-window-to-edges; }
+
+    Mod+C { center-column; }
+
+    // Center all fully visible columns on screen.
+    Mod+Ctrl+C { center-visible-columns; }
+
+    // Finer width adjustments.
+    // This command can also:
+    // * set width in pixels: "1000"
+    // * adjust width in pixels: "-5" or "+5"
+    // * set width as a percentage of screen width: "25%"
+    // * adjust width as a percentage of screen width: "-10%" or "+10%"
+    // Pixel sizes use logical, or scaled, pixels. I.e. on an output with scale 2.0,
+    // set-column-width "100" will make the column occupy 200 physical screen pixels.
+    Mod+Minus { set-column-width "-10%"; }
+    Mod+Equal { set-column-width "+10%"; }
+
+    // Finer height adjustments when in column with other windows.
+    Mod+Shift+Minus { set-window-height "-10%"; }
+    Mod+Shift+Equal { set-window-height "+10%"; }
+
+    // Move the focused window between the floating and the tiling layout.
+    Mod+V       { toggle-window-floating; }
+    Mod+Shift+V { switch-focus-between-floating-and-tiling; }
+
+    // Toggle tabbed column display mode.
+    // Windows in this column will appear as vertical tabs,
+    // rather than stacked on top of each other.
+    Mod+T { toggle-column-tabbed-display; }
+
+    // Actions to switch layouts.
+    // Note: if you uncomment these, make sure you do NOT have
+    // a matching layout switch hotkey configured in xkb options above.
+    // Having both at once on the same hotkey will break the switching,
+    // since it will switch twice upon pressing the hotkey (once by xkb, once by niri).
+    // Mod+Space       { switch-layout "next"; }
+    // Mod+Shift+Space { switch-layout "prev"; }
+
+    Print { screenshot; }
+    Ctrl+Print { screenshot-screen; }
+    Alt+Print { screenshot-window; }
+
+    // Applications such as remote-desktop clients and software KVM switches may
+    // request that niri stops processing the keyboard shortcuts defined here
+    // so they may, for example, forward the key presses as-is to a remote machine.
+    // It's a good idea to bind an escape hatch to toggle the inhibitor,
+    // so a buggy application can't hold your session hostage.
+    //
+    // The allow-inhibiting=false property can be applied to other binds as well,
+    // which ensures niri always processes them, even when an inhibitor is active.
+    Mod+Escape allow-inhibiting=false { toggle-keyboard-shortcuts-inhibit; }
+
+    // The quit action will show a confirmation dialog to avoid accidental exits.
+    Ctrl+Alt+Delete { quit; }
+}

assets/.config/polybar/config.ini

@@ -67,7 +67,7 @@ label-empty-padding = 1
 
 [module/xwindow]
 type = internal/xwindow
-label = %title:0:80:...%
+label = %title:0:50:...%
 
 [module/filesystem]
 type = internal/fs

assets/.config/rofi-rbw.rc

@@ -0,0 +1,7 @@
+selector = fuzzel
+clipboarder = wl-copy
+typer = wtype
+clear-after = 30
+prompt = "🔑 "
+action = copy
+target = password

config/ai.nix

@@ -40,7 +40,7 @@
     host = "0.0.0.0";
     openFirewall = true;
     # Make sure this path is created and has the permissions of ollama:ollama.
-    models = "/mnt/storage/models";
+    modelsDir = "/mnt/storage/models";
     environmentVariables = {
         OLLAMA_CONTEXT_LENGTH = "8192";
     };

config/headful.nix

@@ -1,4 +1,4 @@
-{ config, pkgs, inputs, ... }: {
+{ pkgs, ... }: {
 
   imports = [ ./shared.nix ];
 
@@ -19,37 +19,57 @@
     jack.enable = true;
   };
 
-  # Enable the X11 windowing system and i3 window manager.
-  environment.pathsToLink = [ "/libexec" ];
-  services.xserver = {
-    enable = true;
+  # Enable niri window manager.
+  programs.niri.enable = true;
 
-    # Setup i3 window manager
-    windowManager.i3 = {
+  # Display manager for graphical login
+  services.greetd = {
     enable = true;
-      extraPackages = with pkgs; [
-        rofi
-        alacritty
-        polybarFull
-        i3lock-fancy
-        xautolock
-        autorandr
-        arandr
-        xsel
-      ];
+    settings = {
+      default_session = {
+        command = "${pkgs.tuigreet}/bin/tuigreet --time --remember --cmd niri";
+        user = "greeter";
+      };
+    };
   };
 
-    # Configure keymap in X11
-    xkb = {
+  # Suppress greetd's default virtual terminal log spam.
+  systemd.services.greetd.serviceConfig.LogStandardStream = "journal";
+
+  # XDG Desktop Portals (used for wayland screen sharing, file pickers, etc.)
+  xdg.portal = {
+    enable = true;
+    wlr.enable = true;
+    extraPortals = [ pkgs.xdg-desktop-portal-gtk ];
+    config = {
+      common = {
+        default = [ "wlr" "gtk" ];
+        "org.freedesktop.impl.portal.Settings" = [ "gtk" ];
+        "org.freedesktop.impl.portal.FileChooser" = [ "gtk" ];
+      };
+    };
+  };
+
+  # Configure keymap
+  services.xserver.xkb = {
     layout = "us";
     variant = "";
     options = "caps:escape";
   };
-  };
 
   # List packages to be installed for headful systems
-  #environment.systemPackages = with pkgs; [
-  #];
+  environment.systemPackages = with pkgs; [
+    awww
+    fuzzel
+    waybar
+    kanshi
+    swaybg
+    swaylock
+    swayidle
+    alacritty
+    wl-clipboard
+    xwayland-satellite
+  ];
 
   # Install OpenGL
   hardware.graphics = {

config/logging.nix

@@ -25,6 +25,9 @@
           http_port = 3000;
           domain = "grafana.randomctf.lan";
       };
+      # Legacy default secret key, kept so existing datasource secrets
+      # in the database remain decryptable.
+      settings.security.secret_key = "SW2YcwTIb9zpOOhoPsMm";
   };
 
   services.nginx = {

config/media.nix

@@ -22,6 +22,7 @@
   hardware = {
     nvidia = {
       open = false;
+      package = config.boot.kernelPackages.nvidiaPackages.legacy_580;
       modesetting.enable = true;
       powerManagement.enable = false;
       powerManagement.finegrained = false;
@@ -45,7 +46,7 @@
   # Nextcloud Setup
   services.nextcloud = {
       enable = true;
-      package = pkgs.nextcloud32;
+      package = pkgs.nextcloud33;
       configureRedis = true;
       database.createLocally = true;
       autoUpdateApps.enable = true;
@@ -147,6 +148,29 @@
         '';
       };
 
+      # Actual
+      "actual.randomctf.lan" = {
+        enableACME = true;
+        forceSSL = true;
+
+        extraConfig = ''
+          access_log /var/log/nginx/access.actual.log;
+        '';
+
+        locations."/".extraConfig = ''
+          allow 127.0.0.1;
+          allow 10.0.0.0/8;
+          allow 172.16.0.0/12;
+          allow 192.168.0.0/16;
+          allow 100.64.0.0/10;
+          allow 24.130.12.156;
+          deny all;
+
+          proxy_buffering off;
+          proxy_pass https://localhost:5006/;
+        '';
+      };
+
       # Kiwix
       "kiwix.randomctf.com" = {
         enableACME = true;

config/omen.nix

@@ -54,11 +54,10 @@
 
   # Enable bluetooth
   hardware.bluetooth.enable = true;
-  services.blueman.enable = true;
 
   # System Packages
   environment.systemPackages = with pkgs; [
-    pinentry-gtk2
+    pinentry-gnome3
     protonmail-bridge
     pass
 
@@ -79,7 +78,7 @@
     path = with pkgs; [
       pass
       gnupg
-      pinentry-gtk2
+      pinentry-gnome3
     ];
     serviceConfig = {
       Restart = "always";

config/shared.nix

@@ -56,7 +56,7 @@
   # Setup Pinentry
   programs.gnupg.agent = {
     enable = true;
-    pinentryPackage = pkgs.pinentry-gtk2;
+    pinentryPackage = pkgs.pinentry-gnome3;
     enableSSHSupport = true;
   };
 

flake.lock

@@ -7,16 +7,16 @@
         ]
       },
       "locked": {
-        "lastModified": 1779506708,
-        "narHash": "sha256-QOD/CNm196nCJRheux/URi4/HE66fthdOMqCJoPP1Y0=",
+        "lastModified": 1788642154,
+        "narHash": "sha256-sPpQFVaFTDqO/4vvCAhuAhqTgqN/ygu+9eJcs5eB0js=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "3ee51fbdac8c8bdfe1e7e1fcaba6520a563f394f",
+        "rev": "fd0956c99c41ae3c13a73a638f1f7e963aebc4ab",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
-        "ref": "release-25.11",
+        "ref": "release-26.05",
         "repo": "home-manager",
         "type": "github"
       }
@@ -28,11 +28,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1780935377,
-        "narHash": "sha256-geCmxeKxlozqmj62ooNR7RWTs/UtD4dZ1IQRH51cqAo=",
+        "lastModified": 1788651960,
+        "narHash": "sha256-v9wJd32eZ2bvhBzVOd7TIjLQd011P7nwOhjKtWlci5I=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "301871cd96c005a410e8317e90b80d59ac312c4a",
+        "rev": "2c0350c759688177331b8f5242311fae8877bdb3",
         "type": "github"
       },
       "original": {
@@ -48,11 +48,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1780816331,
-        "narHash": "sha256-0BYqs8yKWkOz2Q7+SP18N5E5gmDKSo6LSxIVIa0wWes=",
+        "lastModified": 1788680125,
+        "narHash": "sha256-amGSoDobwmp4CFvCn841ws2iuitus+HUJdD/gKgsrJA=",
         "owner": "nix-community",
         "repo": "nix-index-database",
-        "rev": "1a2ea89c917781e88508d9fd2b507f2d2a0e173c",
+        "rev": "116ad1c2adb642405ef8916f6a94c8626f971344",
         "type": "github"
       },
       "original": {
@@ -63,11 +63,11 @@
     },
     "nix-unstable": {
       "locked": {
-        "lastModified": 1780749050,
-        "narHash": "sha256-3av0pIjlOWQ6rDbNOmpUSvbNnJkGORQKKjb4LtCZsIY=",
+        "lastModified": 1788614874,
+        "narHash": "sha256-7QYjT2vHLuX9Z1pdxHXDKCbh1CR3D/2rywB9Tx0MPRg=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "a799d3e3886da994fa307f817a6bc705ae538eeb",
+        "rev": "c043004d1c6985732bcc1cbc5a9c9aecbbb4e0f0",
         "type": "github"
       },
       "original": {
@@ -79,16 +79,16 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1780925649,
-        "narHash": "sha256-mkf1vjdWo0C0QXnORNlGwXR98OCdhXQYRs/U60B842s=",
+        "lastModified": 1788797584,
+        "narHash": "sha256-APhAHYS9dgOtYJC0+fGKLhCPflfv96jYBVbz55TpGNw=",
         "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "a7dba237ea747cb6f13b7e8fa22dd116ebddc66c",
+        "rev": "b279e6203ee1bf865290fb789e804d83a1e81718",
         "type": "github"
       },
       "original": {
         "owner": "nixos",
-        "ref": "release-25.11",
+        "ref": "release-26.05",
         "repo": "nixpkgs",
         "type": "github"
       }

flake.nix

@@ -2,9 +2,9 @@
   description = "Configuration flake for RandomCTF";
 
   inputs = {
-    nixpkgs.url = "github:nixos/nixpkgs/release-25.11";
+    nixpkgs.url = "github:nixos/nixpkgs/release-26.05";
     home = {
-      url = "github:nix-community/home-manager/release-25.11";
+      url = "github:nix-community/home-manager/release-26.05";
       inputs.nixpkgs.follows = "nixpkgs";
     };
 

home/headful-nixos.nix

@@ -15,24 +15,27 @@
     ./modules/zsh.nix
   ];
 
-  services.emacs.enable = true;
-
   home.packages = with pkgs; [
-    wireguard-tools
+    # Password manager
     rbw
-    rofi-rbw-x11
+    wtype
+    rofi-rbw
+
+    # Notifications
+    mako
+    libnotify
+    polkit_gnome
+
+    # Other
+    wireguard-tools
   ];
 
   home.file = {
-    ".Xresources".source = ../assets/.Xresources;
-    ".scripts/brightness.sh".source = ../assets/.scripts/brightness.sh;
-    ".scripts/autostart_desktop.sh".source = ../assets/.scripts/autostart_desktop.sh;
-    ".screenlayout/launch.sh".source = ../assets/.screenlayout/launch.sh;
-    ".screenlayout/wallpapers.sh".source = ../assets/.screenlayout/wallpapers.sh;
-    ".screenlayout/polybar.sh".source = ../assets/.screenlayout/polybar.sh;
-    ".config/i3/config".source = ../assets/.config/i3/config;
-    ".config/rofi/config.rasi".source = ../assets/.config/rofi/config.rasi;
-    ".config/polybar/config.ini".source = ../assets/.config/polybar/config.ini;
+    ".config/kanshi/config".source = ../assets/.config/kanshi/config;
+    ".config/niri/config.kdl".source = ../assets/.config/niri/config.kdl;
+    ".config/fuzzel/fuzzel.ini".source = ../assets/.config/fuzzel/fuzzel.ini;
     ".config/alacritty/alacritty.toml".source = ../assets/.config/alacritty/alacritty.toml;
+    ".config/rofi-rbw.rc".source = ../assets/.config/rofi-rbw.rc;
+    ".config/mako/config".source = ../assets/.config/mako/config;
   };
 }

home/modules/development.nix

@@ -23,6 +23,7 @@
     # Other
     python3
     ansible
+    jujutsu
   ];
 
   # To prevent sysroot errors in rust-analyzer

home/modules/emacs.nix

@@ -28,7 +28,7 @@
   programs = {
     emacs = {
       enable = true;
-      package = pkgs.emacs30;
+      package = pkgs.emacs;
       extraPackages = epkgs: with epkgs; [
         mu4e
         vterm
@@ -37,4 +37,9 @@
       ];
     };
   };
+
+  services.emacs = {
+    enable = true;
+    defaultEditor = true;
+  };
 }

home/modules/gui-apps.nix

@@ -5,15 +5,14 @@
     dconf
     brave
     vesktop
-    zoom-us
     twinkle
     audacity
     wireshark
-    flameshot
     libreoffice
     pavucontrol
     easyeffects
     virt-viewer
+    signal-desktop
     nextcloud-client
     protonmail-desktop
     kdePackages.okular
@@ -37,13 +36,27 @@
 
   gtk = let
     theme = {
-      name = "Materia-dark";
-      package = pkgs.materia-theme;
+      name = "Colloid-Dark";
+      package = pkgs.colloid-gtk-theme;
+    };
+    iconTheme = {
+      name = "Papirus-Dark";
+      package = pkgs.papirus-icon-theme;
     };
   in {
     enable = true;
-    inherit theme;
-    gtk4.theme = theme;
+    inherit theme iconTheme;
+    gtk4 = {
+      inherit theme iconTheme;
+      extraConfig = {
+        gtk-application-prefer-dark-theme = 1;
+        gtk-color-scheme = "prefer-dark";
+      };
+    };
+    gtk3.extraConfig = {
+      gtk-application-prefer-dark-theme = 1;
+      gtk-color-scheme = "prefer-dark";
+    };
   };
 
   xdg.mimeApps = {